News

What advanced tools and cutting technologies are used in the processing of Parts for photovoltaic and semiconductor equipment assembly?

Publish Time: 2024-10-20
In the processing of Parts for photovoltaic and semiconductor equipment assembly, advanced tools and cutting technologies play a vital role.

For the selection of tools, high-performance carbide tools and coated tools are usually used. Carbide tools have high hardness, high strength and good wear resistance, and can adapt to high-intensity cutting processing. Coated tools are coated with a layer of special materials on the surface of the tool, such as TiN, TiAlN, etc., which can not only improve the hardness and wear resistance of the tool, but also reduce the cutting force and cutting temperature, and extend the service life of the tool.

In terms of cutting technology, high-speed cutting technology is widely used. High-speed cutting can greatly improve processing efficiency and reduce processing time. At the same time, due to the high cutting speed and small cutting force, it can reduce the deformation of parts and improve processing accuracy. In addition, high-speed cutting can also obtain better surface quality and reduce surface roughness.

Micro-lubrication cutting technology is also an advanced cutting technology. This technology sprays a small amount of lubricating oil mist into the cutting area, which can not only play a lubricating role, reduce tool wear, but also reduce cutting temperature and improve processing quality. At the same time, the micro-lubrication cutting technology can also reduce the use of cutting fluid, reduce costs, and is more environmentally friendly.

In addition, five-axis machining technology also plays an important role in the processing of Parts for photovoltaic and semiconductor equipment assembly. Five-axis machining can realize one-time clamping processing of parts with complex shapes, reduce machining errors, and improve machining accuracy. At the same time, five-axis machining can also improve machining efficiency and reduce production costs.

In short, in the processing of Parts for photovoltaic and semiconductor equipment assembly, the application of advanced tools and cutting technology can improve machining efficiency, machining accuracy and surface quality, and meet the high requirements of photovoltaic and semiconductor equipment for parts. With the continuous advancement of technology, it is believed that more advanced tools and cutting technologies will be applied to this field to promote the development of the photovoltaic and semiconductor industries.
×

Contact Us

captcha